American Eagle ATV Plows The American Eagle has a five position adjustable blade angle with up to 26 1/2 degrees of angle.  There are  also adjustable blade pitch stops for maximum blade adjustment.  It also features a solid 5/8" diameter blade positioning pin (largest in the industry).  It comes standard with hardened 3/4" thick Ductile steel square steel tubing and has a 1/4" steel construction at all critical mounting points.   Quick Mount System: (Patent Pending) To mount the plow you simply roll the ATV into the raised plow frame, and secure it with the Quick Latch. The Quick Latch bracket system features spring loaded swing latches which allows the operator to quickly attach the plow frame to the ATV mount without tools or having to line up the mounting holes. American Manufacturing's ATV Plow Attaching System is the first and only ATV plow that uses a Patent Pending two part mount.  This two part system consists of a Mounting Plate and the Universal Tube Frame Mount.  Once the Mounting Plate is attached to the ATV you can simply slide on the Universal Tube Frame Mount and tighten four bolts.  Before trail riding you simply loosen the same four bolts and slide the Universal Tube Frame Mount off.  This system has the benefit of no loss of ground clearance, or any hanging parts to catch or bend.  As an added bonus the Mounting Plate also doubles as a heavy-duty skid plate. Mounting Plates and Quick Mount do not use U-bolts No loss of ground clearance from protruding bolts when plow is removed Quick Mount - No pins to lose or holes to line up   Plow Blade Construction 12 gauge high alloy steel blend is 40% stronger by weight than other blades. Available in 50", 60" and 72" Standard Blades, and 50", 60" and 72" Country Plows (rubber flap is included on Country Plows only) Available in Black and Yellow 3"-wide, 1/4" thick, double-sided wear bar 26 1/2 degree plow angle 3/4"-thick Blade Skids - thickest in the industry   Swivel Construction 5/8" Blade Swivel Pivot Mount 1/2" Blade Mounting Pivots Swivel is constructed of 3/8" thick material and 1 3/4" angle iron for strength and wear Swivel attaches to blade 20" apart for the strongest blade mounting system Built-in blade stops to prevent dented blades 5 pivot positions provide up to 26 1/2 degrees of angle 5/8" blade position pin 8"-wide for better stability 4-position, 3/8"-thick blade pitch stop   Blade Skids 1/4"-thick Skid Mounting Bracket is the widest around for added strength Height is fully  adjustable Made from Ductile Steel - The hotter it gets, the stronger it gets Ten times more wear - On dry pavement our standard skid lasts 29 miles versus the 2.9 miles of other plow manufacturers standard skid 3/4"-thick standard, thickest in the industry Widest skid mount available, stronger than anything else out there   The Winch Mounting Kit - Easily attaches to your ATV.  Custom fitted for each make/model.